Autowatch Ghost Immobiliser Installation
The Ghost is the UK's most advanced aftermarket immobiliser for CAN bus. It's discreet, doesn't use LED indications or key fobs and is hidden within the wiring of the vehicle.
The user can also disable the system for a short period of time by using Transport Mode when renting their car. This guide will guide you through the steps of installing a Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your car from key hacking attacks, cloning attacks and relay attacks. The system is directly connected to the ECU of your vehicle and protected by a PIN code that you choose. It's inaccessible to thieves using diagnostic scanners or other advanced methods, and is not able to be disabled by circuit cuts.
immobiliser ghost is simple to use, but professional installation is recommended to ensure a clean connection with the ECU of your vehicle. A certified installer from Thatcham can assist with the installation and programming of your Ghost system. They can also suggest a tracking device or alarm to complete your vehicle's security package.
The first step is to disconnect your battery in order to avoid the possibility of airbag deployment and short circuits. After the battery has been disconnected, the installer can start working safely. Basic hand tools can be used to ensure precise connections. A multimeter can be used to test electrical values. Cable tie and insulation tape are vital to secure connections and ensure that wiring is neat. The Ghost Immobiliser user's guide will provide specific instructions tailored to your model.
During the installation process, it's crucial to select an area for grounding that is free of debris and paint. Installers should also make sure that the immobiliser's wires CAN H and the CAN L are connected to the appropriate ECU ports. The wires can be connected or soldered based on the model. A top-quality connector is recommended to ensure a long-lasting and secure connection.
Transport Mode can be activated by the customer once the installation is completed. This allows valet parking or mechanics to access the vehicle without having to know the pin code. The customer has to press the service icon on the dashboard five times within 2 seconds. The system will confirm this by showing 5 indicators.
The Autowatch Ghost 2 immobiliser is TASSA approved and is a highly efficient immobiliser. It's a great option for those who rent their vehicles often through platforms like Turo. Immobilisers can also reduce insurance premiums, since it significantly decreases the risk of theft.
Getting Started
If you are seeking a solution to secure your vehicle from thieves it is best to go with an autowatch ghost immobiliser. It will stop your car from starting even when a criminal steals or copies the key. This is due to its advanced technology, which is designed to stop the engine from running without the correct PIN code is entered.
The device connects to the CAN bus network in your vehicle, allowing it to communicate with the ECU directly. It uses buttons that are already present on the dashboard and the steering wheel to create a unique sequence only you can identify which makes it impossible for others to start your vehicle. This is the most secure security system that will safeguard your pride and joy and preserve its value in the event that you decide to sell it in the future.
Installing an immobiliser from Ghost is simple however, you must follow the directions to avoid electrical problems and malfunctions in the system. First, you must locate and identify a constant 12V power source and an appropriate grounding point on the vehicle's chassis. Then, you'll be able to begin connecting the wires to the immobiliser. Make sure you use top-quality connectors and soldering techniques to ensure a secure connection. Also, make sure to cover the connections with heat shrink tubing or insulation tape to protect them from short circuits in electrical power and other issues.
After the wires have been connected, you can connect the battery and turn on the engine to test the immobiliser's functionality. Once everything is working properly you can place it in a secure location beneath the dash or anywhere else in the vehicle. Be sure to cover it in a secure manner to prevent any thief from taking advantage of it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) certified this means it is in compliance with the highest standards of security and is a great protection against car thieves. It is impervious to hacking and key cloning and cannot be disabled without a code. The device is also simple to use and can be put into the service valet mode to ensure that your vehicle isn't activated if you bring it in for maintenance or an MOT.
Wiring
The Ghost Immobiliser is a cutting-edge security system designed to stop theft of vehicles. It connects directly to the vehicle's CAN bus and communicates with the ECU, making it virtually undetectable to your car. Unlike other aftermarket systems that require the removal of circuit components, the Ghost Immobiliser doesn't interfere with any of your vehicle's factory settings.
The system is also undetectable by thieves using scanners for diagnostics. The system doesn't send or receive radio frequency signals but instead uses CAN data to communication with your ECU. It doesn't require any modifications to your existing key fobs.
Enter your sequence for disarming (either two or one button) and then turn on the ignition of your vehicle to use Ghost Immobiliser. The indicator will flash two times to confirm that you've entered the correct code. After that, you are able to start your car and drive away safely.
Once installed, the Ghost Immobiliser will protect your car from hacking and key cloning, while protecting the value of your pride and joy. If you have to surrender your vehicle to a valet or service provider The Ghost Immobiliser will be temporarily disabled in Transport Mode.
You'll require a constant power source (12V) and an earthing point to complete the installation of a Ghost immobiliser. Make sure that both are well-insulated and safe to touch. Cable ties are also suggested to secure the wires. This will reduce the possibility of theft by potential thieves. Make sure you check the exact location of these points to avoid making mistakes and mark them with the help of tape or a label. It's recommended to examine all connections for signs of wear and tear. Make sure all connections are in place, and are properly sealed. Also, don't forget test the Ghost Immobiliser after installation is completed. This will ensure that the unit is operating correctly and that all connections and insulation are safe. If you encounter any issues, make sure to address them immediately.
Testing
The Autowatch Ghost immobiliser is an innovative vehicle security system that integrates seamlessly with your car's ECU in order to prevent the motor from starting without authorization. Its cutting-edge technology safeguards your car from key cloning and hacking and other methods that thieves employ to steal cars. The Ghost also works in conjunction with other alarm and tracking systems to offer the best protection for your vehicle. The Ghost's unparalleled features, coupled with its subtle design, make it a popular option for both drivers who love cars and security-conscious drivers.
It is essential to follow the steps of installation to ensure a correct integration of the Ghost Immobiliser. The best place to start is to look over the wiring diagram for your vehicle, which will serve as a guideline for locating and connecting the required wires. Then, you'll need to determine the power source and grounding points. Once you've identified these, you'll be required to mark them so that they're easily identifiable during the installation process. It's essential to use high-quality materials and tools. Basic hand tools will assist you in making precise connections. A multimeter will check electrical values and guarantee security. Cable tie and insulation tape ensure that all connections are neat. A Ghost-specific user's guide is also available.
Before beginning the installation it is essential to test the system by entering the PIN code and then starting the vehicle. This step will confirm the immobiliser works as intended and will stop vehicle starts that are not authorized. This step should be done regularly as part of your routine vehicle inspections in order to ensure the system is working properly.
Once the installation has been completed, you can begin driving your vehicle with confidence. The Ghost will guard your pride and joy from would-be car thieves. It will ensure that no one can escape with your car without having the correct PIN code. The Ghost can also be used with a tracker approved by Thatcham to detect any attempt to steal or tamper, allowing you to locate your vehicle in the event of it being stolen.
The Ghost is compatible with a wide variety of vehicles, including those from all major manufacturers. Monty's Locksmith can assist you in securing your vehicle with this innovative device. Contact us today to find out more about our services and installation options. We are a TASSA registered installer, a certificate that ensures that we adhere to strict standards in the installation of our products. This guarantees customers, insurance companies, and law enforcement agencies that all installations are performed safely and correctly.